Barco 26-0313000-00 manual BåÜ~åÅÉÇ=lìíéìí=jÉåì, Enhanced Output Menu

5. Menu Orientation

Output Menu

båÜ~åÅÉÇ=lìíéìí=jÉåì

From the Output Menu, press {E OUT} to display the Enhanced Output Menu.

		ENHANCED OUTPUT MENU
H	Output Source				Program
O
M					N
					A
E	Format	1024x768 @ 59.94
					V
B	Color Space				RGB
A
C
K
					A
					D
					J
S
A
V
E
	APPLY		SETTINGS	TEST
	FORMAT			PATTERN
Figure 5-11.Enhanced Output Menu (sample)

The Enhanced Output Menu sets up basic parameters for SP-II’s enhanced output.

Note

The menu is only available for ScreenPRO-II units that have the EOC (Enhanced Output Card) option installed.

•Source — selects the source of the SP-II’s enhanced output signal. Select between Program and Preview.

•Format — sets the resolution and frame rate at which you want to drive the enhanced output. The EOC supports the following resolutions:

~	NTSC (480i)	~	1400 x 1050
~	PAL (576i)	~	1600 x 1200
~	800 x 600	~ 1280 x 720p @ 50, 59.94, 60
~	1024 x 768	~ 1920 x 1080i @ 50, 59.94, 60
~	1280 x 1024	~ 1920 x 1080p @ 25, 29.97, 30

•Color Space — sets the output’s color space to either RGB or YPbPr.

•Press {SAVE} to save all enhanced output parameters.

•Press {APPLY FORMAT} to accept a selected output format.

•Press {SETTINGS} to display the Enhanced Output Settings Menu. Refer to the “Enhanced Output Settings Menu” section on page 162 for details.

•Press {TEST PATTERN} to display the Enhanced Output Test Pattern Menu. Refer to the “Enhanced Output Test Pattern Menu” section on page 163 for complete details.

Encore Presentation System • User’s Guide • Rev 04 161