Cisco Systems CISCO1750 manual Cabling Specifications, Ethernet Cables

B

Cabling Specifications

This appendix describes cables and cabling guidelines for the router and contains the following sections:

•Ethernet Cables

•Ethernet Network Cabling Guidelines

•Console Cable and Adapters

•VIC Cables and Pinouts

Note For detailed information about cables used with Cisco WICs and

VICs, refer to the Cisco WAN Interface Cards Hardware Installation

Guide that comes with each of the cards.

Ethernet Cables

This section describes the Ethernet cables that are used to connect the router to your local Ethernet network. A 10/100BaseTX router, like the Cisco 1750 router, requires Category 5 unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable. Table 1 describes the pinouts for a RJ-45-to-RJ-45 Ethernet cable.

Cisco 1750 Router Hardware Installation Guide

78-6169-02 i