Cisco Systems CISCO1750 manual Rear-Panel Connectors continued, Label/Color, Rear Panel LEDs

							Rear-Panel Ports and LEDs
Table 2		Rear-Panel Connectors (continued)
Connector/Slot			Label/Color			Description
WIC/VIC slot			SLOT 0			Supports either a Cisco WIC or VIC. For detailed
						information, refer to the Cisco WAN Interface Cards
						Hardware Installation Guide that comes with every
						card.
WIC/VIC slot			SLOT 1			Supports either a Cisco WIC or VIC. For detailed
						information, refer to the Cisco WAN Interface Cards
						Hardware Installation Guide that comes with every
						card.
VIC slot			SLOT 2			Supports one Cisco VIC. For detailed information, refer
						to the Cisco WAN Interface Cards Hardware
						Installation Guide that comes with every card.
Power socket			+5, +12, –12			Router connection to the external power supply.
			VDC
Protective earth			Ground wire			Router connection to earth ground by using a green and
						yellow 14 AWG ground wire.
			Use the rear-panel LEDs during router installation to confirm that you have
			correctly connected all cables to the router.
			Table 3	Rear Panel LEDs
			LED Label		Color		Description
			FDX		Green		On—Ethernet port is operating in full-duplex mode.
							Off—Ethernet port is operating in half-duplex mode.
			100		Green		On—Ethernet port is operating at 100 Mbps.
							Off—Ethernet port is operating at 10 Mbps.
			LINK		Green		On when the Ethernet link is up.
			SLOT 0 OK		Green		On when either a WIC or VIC is correctly inserted in the
							card slot.
			SLOT 1 OK		Green		On when either a WIC or VIC is correctly inserted in the
							card slot.
							Cisco 1750 Router Hardware Installation Guide
	78-6169-02							v