Cisco Systems CISCO1750 manual Press the router power switch to on

Connecting Power to the Router

Warning This equipment needs to be grounded. Use a green and yellow 14 AWG ground wire to connect the host to earth ground during normal use.

Follow these steps to connect power to the router and to turn the router on:

Step 1 Connect the attached power-supply cord to the power socket (labeled +5, +12, –12 VDC) on the router rear panel.

Step 2 Connect one end of the separate power cord to the socket on the power supply. Step 3 Connect the other end of the separate power cord to a power outlet.

Step 4 Press the router power switch to on ( ).

Step 5 Confirm that the router has power by checking that the PWR LED on the front panel is on.

Figure 4 Connecting the Power Supply

	VIC
	2FXS
SLOT 1 OK	SLOT 0 OK

IN USE
1				USE
SEE	MANUAL
		BEFORE	INSTALLATION	IN	SLOT 1Cisco
				0		1750

SLOT 2

SLOT 0	CONSOLE
FDX
100
LINK
10/100 ETH
ERNET
	AUX

VIC	INUSE
2FXO
	1	SEE							IN USE
	THIS		MANUAL
					BEFORE
		SLOT ACC					INSTALLATION
				EPTS ONLY
						VOICE		INTERFACE	0
									CARDS
					PVDM OK

SLOT 2 OK

+5,	+12, -
	12 VDC

17479

Separate	Power socket
power cord
Power supply	Attached
	power supply cord

Cisco 1750 Router Hardware Installation Guide

78-6169-02 ix