Opening the Chassis
Opening the Chassis
To install or upgrade memory or data modules, you must open the chassis.
Opening the chassis requires a number one Phillips screwdriver.
Follow these steps to open the chassis:
Step 1 Make sure the router is turned off and is disconnected from the power supply. Step 2 Turn the router upside down, and rest the top of the router on a flat surface.
Step 3 Use the Phillips screwdriver to remove the four screws that hold the top and bottom of the chassis together, as shown in Figure 1.
Step 4 Turn the router back to its original position
Cisco 1750 Router Hardware Installation Guide
| iii | |
|
