Cisco Systems CISCO1750 manual Installing a Mini-Flash Module, Removing a Mini-Flash Module

Installing a Mini-Flash Module

Installing a Mini-Flash Module

You can install a mini-Flash module (shown in Figure 3) to increase the amount of Flash memory in the router.

Figure 3 Mini-Flash Module

Notched edge

12612

Removing a Mini-Flash Module

Follow these steps to remove a mini-Flash memory module:

Note You need to remove the motherboard from the chassis to remove the mini-Flash memory module.

Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the router. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself.

Cisco 1750 Router Hardware Installation Guide

vi 78-6169-02