Foxconn N570SM2AA Installation Instructions, Recommended Memory Configurations, Mode, DIMM1

Chapter 2 Installation Instructions

Memory

This motherboard includes four 240-pin slots with 1.8V for DDR2. These slots support 256 Mb, 512 Mb and 1 Gb DDR2 technologies for x8 and x16 devices, and support dual channel DDR2 memory technology up to 10.7GB/s. You must install at least one memory bank to ensure normal operation.

Recommended Memory Configurations

The following table list is the recommended memory configurations. Please install the memory according to the list.

Mode	DIMM1	DIMM2	DIMM3	DIMM4
	Populated
		Populated
			Populated
Single Channel				Populated
	Populated		Populated
		Populated		Populated
	Populated			Populated
		Populated	Populated
	Populated	Populated
Dual Channel			Populated	Populated
	Populated	Populated	Populated	Populated

Installation of DDR2 Memory

1.There is only one gap near the center of the DIMM slot, and the memory module can be fixed in one direction only. Unlock a DIMM slot by pressing the module clips outward.

2.Align the memory module to the DIMM slot, and insert the module vertically into the DIMM slot.

128 Pins112 Pins

3. The plastic clips at both sides of the DIMM slot will lock automatically.

11