Foxconn N570SM2AA user manual Assigning the Disks, Completing the RAID Bios Setup

Appendix

•Assigning the Disks

The disks that you enabled from the RAID Config BIOS setup page appear in the Free Disks block. These are the drives that are available for use as RAID array. To designate a free disk to be used as a RAID array:

1.Tab to the Free Disks section. The first disk in the list is selected.

2.Move it from the Free Disks block to the Array Disks block by pressing the right arrow key (→). The first disk in the list is moved, and the next disk in the list is selected and ready to be moved.

3.Continue pressing the right-arrow key (→) until all the disks that you want to use as RAID array appear in the Array Disks block.

It shows that two disks have been assigned as RAID1 array disks in the figure above.

Completing the RAID BIOS Setup

1.After assigning your RAID array mode, press F7. The Clear disk data windows prompt appears.

71