Foxconn N570SM2AA user manual PnP/PCI Configurations, BIOS Description, vReset Configuration Data

Chapter 3 BIOS Description

PnP/PCI Configurations

PnP/PCI Configurations Menu

vReset Configuration Data

This option is used to set whether the system is permitted to automatically distribute IRQ DMA and I/O addresses when each time that the machine is turned on. The setting values are: Disabled and Enabled.

vResouces Controlled By

This option is used to define the system resource control scheme. If all cards you use support PnP, then select Auto (ESCD) and the BIOS will automatically distribute interruption resources. If the ISA cards you installed not support- ing PnP, you will need to select “Manual” and manually adjust interruption resources in the event of hardware conflicts. However, since this motherboard has no ISA slot, this option does not apply.

vIRQ Resources

Press the <Enter> key, then manually set IRQ resources.

vPCI/VGA Palette Snoop

If you use a non-standard VGA card, use this option to solve graphic accelera- tion card or MPEG audio card problems (e.g., colors not accurately displayed). The setting values are: Disabled and Enabled.

vInit Display First

This option is used to set which display device will be used first when your PC starts up.

vMaximum Payload Size

This option is used to set maximum TLP payload size for PCI Express devices.

40The unit is byte.