Foxconn N570SM2AA user manual Drive a, Halt On, Memory

Chapter 3 BIOS Description

Drive A

This option allows you to select the kind of FDD to be installed,including

“None”, [360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5 in].

Halt On

This category determines whether or not the computer will stop if an error is detected during powering up.

All Errors	Whenever the BIOS detects a nonfatal error, the system
	will stop and you will be prompted.
No Errors	The system boot will not stop for any errors that may
	be detected.
All, But Keyboard	The system boot will not stop for a keyboard error; but
	it will stop for all other errors.
All, But Diskette	The system boot will not stop for a diskette error; but
	it will stop for all other errors.
All, But Disk/Key	The system boot will not stop for a keyboard or disk
	error, but it will stop for all other errors.

Memory

This is a Display-Only Category, determined by POST (Power On Self Test) of the BIOS.

Base Memory	The BIOS POST will determine the amount of base (or
	conventional) memory installed in the system.
Extended Memory	The BIOS determines how much extended memory
	is present during the POST.
Total Memory	Total memory of the system.

24