Barco 26-0313000-00 manual Mfm=ÇàìëíãÉåí=pìÄ=jÉåìë, Mfm=gçóëíáÅâ=cìåÅíáçåë

5. Menu Orientation

PIP Adjustment Menu

•Move Rate — adjusts the rate (in 0.1 second increments) for programmed PIP “moves” from keyframe to keyframe. To adjust, select the RATE radio button and twist the Joystick Z-Axis knob.

•Key Frame Effect — indicates the “motion type” that is used to move the PIP from point to point.

~If no move is programmed, the display reads [N/A].

~If a move is programmed, the motion type is shown (e.g., [Linear]). The motion type is selected on the Effects Menu.

•Press {CLONE} to display the Clone Setup Menu (if the Clone button is enabled). Refer to the “Clone Setup Menu” section on page 216 for details.

•Press {BORDR} to display the Border Menu. Refer to the “Border Menu” section on page 218 for details.

•Press {SHDOW} to display the Shadow Menu. Refer to the “Shadow Menu” section on page 219 for details.

•Press {EFX} to display the Image Effects Menu. Refer to the “Image Effects Menu” section on page 220 for details.

•Press Source in the Joystick Section to display the Input Source Adjustment Menu. Refer to the “Source Adjustment Menus” section on page 232.

mfm=gçóëíáÅâ=cìåÅíáçåë

At the bottom of the PIP Adjustment Menu, four radio buttons enable the Joystick to be assigned to various PIP adjustment functions.

•Press {TRACK} to lock H Size and V Size together. Regardless of the PIP’s current aspect ratio, its size will adjust proportionally when the Joystick’s Z-Axis knob or the SIZE rotary knob is used to change size.

•Press {H SIZE} to adjust only the horizontal size, leaving the vertical size alone. In this way, you can stretch the PIP horizontally.

•Press {V SIZE} to adjust only the vertical size, leaving the horizontal size as is. In this way, you can stretch the PIP vertically.

•Press {RATE} to adjust the move rate of the PIP, from keyframe to keyframe. Please note the following additional related functions:

•To return the PIP to its default size and aspect ratio, press the Reset button in the Joystick Section.

•To adjust the PIP with fine resolution, press the Fine Adjust button in the Joystick Section.

mfm=^ÇàìëíãÉåí=pìÄ=jÉåìë

The following sub menus can be accessed from the PIP Adjustment Menu:

•Clone Setup Menu

•Border Menu

•Shadow Menu

•Image Effects Menu

Complete descriptions are provided in the following sections.

Encore Presentation System • User’s Guide • Rev 04 215