MATRIXPRO2

5. Menu Orientation

System Menu

•Router Output — selects the specific router output designated as an Aux (as assigned on the router’s Output Patch Menu).

•Press {RESET} to return all fields to <UNDEFINED>.

When an ImagePRO Aux or PrePRO-II Aux destination “type” is selected on the Destination Setup Menu, the Aux Setup Menu appears in this form:

RESET

Figure 5-33.Aux Setup Menu — ImagePRO Aux Destination (sample)

The following functions are provided:

•Top Line — displays the type of Aux destination and its selected number.

•Source Mapping — two selections are available:

~Input Patch — maps Aux sources according to how your inputs are patched to buttons in the console’s Source Selection section.

~Direct Map — maps Aux sources according to how your inputs are connected to the router.

•ImagePRO ID (or PrePRO-II ID) — selects the ID of the ImagePRO or PrePRO-II, to which you want to route Aux sources.

•Analog Router Name — selects the router from which analog sources will be routed to the ImagePRO or PrePRO-II.

•Analog Router Output — selects the specific router output designated as Aux (as assigned on the router’s Output Patch Menu).

•ImagePRO Input (or PrePRO-IIinput) — selects the ImagePRO or PrePRO-II input to which the router output is connected.

•SDI Router Name — selects the router from which SDI sources will be routed to the ImagePRO or PrePRO-II.

•SDI Router Output — selects the specific router output designated as Aux (as assigned on the router’s Output Patch Menu).

•ImagePRO Input (or PrePRO-IIinput) — selects the ImagePRO or PrePRO-II input to which the router output is connected.

•DVI Router Name — selects the router from which DVI sources will be routed to the ImagePRO. (Not applicable to PrePRO-II Aux destinations.)

Encore Presentation System • User’s Guide • Rev 04		185