Installing or removing router bit
CAUTION :
Always be sure that the tool is switched off and unplugged before installing or removing the bit.
Insert the bit all the way into the collet |
|
cone and tighten the collet nut securely |
|
with the two wrenches. |
|
To remove the bit, follow the installation | Tighten |
procedure in reverse. | t |
CAUTION :
Do not tighten the collet nut without inserting a bit, or the collet cone will break.
Adjusting depth of cut
Place the tool on a flat surface. Loosen the screw securing the stopper pole.
Loosen the lock lever and lower the tool body until the bit just touches the flat surface. Tighten the lock lever to lock the tool body.
5
