Straight guide (optional accessory)
The straight guide is effectively used for straight cuts when chamfering or grooving.
To install the straight guide, insert the guide bars into the holes in the tool base. Adjust the distance between the bit and the straight guide. At the desired distance, tighten the wing bolts to secure the straight guide in place.
1 | J |
When cutting, move the tool with the straight guide flush with the side of the workpiece.
If the distance (A) between the side of the workpiece and the cutting position is too wide for the straight guide, or if the side of the workpiece i s not straight, the straight guide cannot be used. In this case, firmly clamp a straight board to the work- piece and use it as a guide against the router base. Feed the tool in the direction of the arrow.
8
