GarrettCom 1024, 1016 Magnum 1000 Workgroup Hubs, Installation and User Guide 04/02, AC Power

Magnum 1000 Workgroup Hubs Installation and User Guide (04/02)

Magnum 1024

Workgroup Hub	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24
GARRETT

Figure 2.2.2b: Front view - Magnum 1024 Workgroup Hub

In the rear, the basic AUI (standard female) port, shown in Figure 2.2.2c, may be used for a direct connection with an AUI drop cable or for connection to any media type via an external mini-transceiver. When using standard AUI cabling to connect to other Ethernet devices, it is important to consider the AUI segment length, including any cascading. Refer to Section 3.3.2 for detailed information on the basic AUI port, connector pins and standard cable length requirements. (NOTE: The basic AUI port is NOT an RPM-AUI, it is simply an AUI port without any LEDs.)

AC Power	Configurable Bonus Port	Basic AUI Port
115 - 230 VAC	(RPM-FST Shown)

Figure 2.2.2c: Rear view - Magnum 1016 and 1024 Workgroup Hubs

The Bonus Port slot of a Magnum 1016 or 1024, shown in Figure 2.2.2c, may be optionally configured with any Magnum Port Module (PM). This option gives the Magnum 1016s and 1024s great flexibility to easily conform to any standard Ethernet media environment. When configured with a Repeater Port Module (RPM), the rear port can be used for direct connection to any standard Ethernet media. With a Bridge Port Module (BPM), the rear port is used to bridge-isolate the Magnum hub from the rest of the network, increasing bandwidth for both the local users and the rest of the network. Refer to Section 2.4 for Magnum Port Module information.

Status LEDs are located on the front panel of both the 1016 and 1024 for convenient monitoring of PWR, ACT and LINK (per port). Magnum 1016 and 1024 hubs have auto-ranging internal power supplies, are suitable for table-top-, wall-, or rack-mounting. Rack-mount “ears” are supplied with both the Magnum 1016 and Magnum 1024 Workgroup Hubs.

www . GarrettCom . com

7