GarrettCom 1016, 1024, 1008 Magnum 1000 Workgroup Hubs, Installation and User Guide 04/02, Rpm-Dte

12

1

Magnum RPM-DTE

2

1 Partition LED

2 Receive LED

Standard 15-pin male "AUI"

Magnum RPM-AUI

1

2

with slide-lock

Receive LED

Standard 15-pin female AUI,

Partition LED

Magnum 1000 Workgroup Hubs Installation and User Guide (04/02)

used with a variety of different mini-transceivers to provide connectivity to any media type.

The RPM-AUI card is equipped with Partition (PART) and Receive (RX) LEDs. The RX LED functions the same as the RX LEDs of the RPM-BNC. The PART LED is inoperative on Model 1000 Workgroup Hubs. (Section 2.4.1 above).

The Magnum RPM-AUI card is also used for connecting Ethernet devices using standard

AUI cabling. In this situation, it is important to consider the AUI

segment length or distance to the attached device, including any

cascading. Refer to Section 3.3.2 for detailed information on the AUI

port, connector pins, and cable length requirements.

2.4.3RPM-DTE

1

2

The Magnum RPM-DTE is a module equipped with a 15-pin male DTE connector with lock posts. (The RPM-DTE is a mating connector for the RPM-AUI which has a 15-pin female connector and slide locks. The pin assignments of the two are the same). The RPM-DTE card

is designed to support direct

connections (no transceiver required) using AUI drop cables to

any device that is equipped with an AUI port. Examples of such devices

include servers, routers, bridges, hubs, and UNIX workstations.

www . GarrettCom . com