GarrettCom 1008 Magnum 1000 Workgroup Hubs, Installation and User Guide 04/02, Bpm-Fst, Bpm-Tp

1

Magnum BPM-TP

MDI-XCross-over

Slide Switch

Shielded RJ-45

Connector

Magnum 1000 Workgroup Hubs Installation and User Guide (04/02)

2.4.10BPM-FST

The Magnum BPM-FST is a multi-mode fiber optic local-bridge module equipped with a dual ST-type connector. It is self-learning and filters and forwards

packets at full Ethernet wire speed. When used for 10BASE-FL segments, this module
supports fiber optic transmission	10BASE-FL, FOIRL
distances up to 2000m. For FOIRL, it
	ST Connectors
supports fiber segments of up to	2	1	FWD-X LED
1000m in length. The BPM-FST
	1	2	FWD-I LED
includes full transceiver functionality	3
			LINK LED
		3
and does not require an external
transceiver device. The BPM-FST has
	Magnum BPM-FST
three status LEDs. FWD-I and FWD-X

are identical to those of the BPM-BNC (Section 2.4.9). In addition, this module has a GREEN LINK LED, that is always on when the link is operational.

2.4.11 BPM-TP

The Magnum BPM-TP card is equipped with a single RJ-

45 connector and supports standard length Ethernet twisted pair segments. The RJ-45 connector is shielded to minimize emissions

and allows both unshielded twisted pair

(UTP) and shielded twisted pair (STP) segment connections.

1FWD-X LED

2 FWD-I LED

3 LINK LED

3

2

The BPM-TP module is also equipped with a Media Dependent Interface- Crossover (MDI-X) slide switch to allow for cascaded connections. This feature eliminates the need for a special twisted pair crossover cable (see RPM-TP, 2.4.7).

The BPM-TP will support 10BASE-T unshielded twisted pair wiring (UTP) with maximum segment distances of 100m (325 ft.), or shielded twisted pair wiring (STP) of 150m (500 ft.). This module is designed with internal transceiver functionality. The status LEDs are the same as those of the BPM-FST (Section 2.4.10).

www . GarrettCom . com

17