and Operation
Introduction
Viewing ・ Listening
Recording
Set up
Others
Presetting of Camera Position by Administrator (Cont.)
Selecting a Preset
Selecting a preset from the list moves the camera to the preset position.
1 In the list, click 
(go to Preset) button on the left of the preset you want to select.
･The camera will only move to a preset that has been set. Selecting a blank preset will not move the camera. See "Configuring a Preset" on the next page.
Configuring a Preset
Assign the camera position in the Preset list.
1 Click the 
button to move the camera to the position you want to set.
2 In the list, click 
(set Preset) button on the right of the preset you want to configure.
3 Click the OK button to assign a preset position.
・Assign the current camera position in the selected preset.
NOTE
●Any existing settings of a preset will be overwritten when you assign new settings to the preset.
●The brightness adjustment value, rear light correction setting and manual/ auto focus setting are stored for each preset number.
Introduction | |
and | Viewing |
Operation | Listening |
| ・ |
Recording | |
Set up
Others
42 | 43 |
