and Operation
Introduction
Viewing ・ Listening
Recording
Set up
Others
Log Management (Log Management/Browse and Delete)
The log display can be viewed and managed.
See"Log display" on page 107 for data in log display.
1 Click "Log Management" in the Admin. Menu.
･The sub menu for Log Management will appear.
2 Click "1. Browse and Delete" in the sub menu.
･A setup screen of "Log Management /Browse and delete" will appear.
3 Looking up the log or setup items.
●Log Browse
The log is displayed.
●Filter Settings To filter the log:
1)Select "Set Condition" in "Display."
2)Select appropriate option in "Display Condtion Settings".
3)Click the "Refresh Logs" button.
Only logs of set conditions will appear.
NOTE
●Click the "Save Conditions" button to save conditions.
●Click the "Delete Logs" button to delete logs.
●In keyword you cannot use these characters: ' "
Alarm Terminals
You can connect a variety of sensors to the camera by using alarm terminals. See following table for functions of each terminal.
| � | � | Normal Opened (NO) or Normal Closed (NC). � | Introduction |
| Name� | Function� | Description� |
|
| � | � | � � |
|
| ALARM IN� | Alarm Input� | ・Inputs External Alarm signal.� |
|
| � |
| ||
| � | � | You can choose the type of input signal:� |
|
| � | � | Connect a sensor or other devices to the � |
|
| � | � | camera.� |
|
ALARM OUT� | Alarm Output� | ・Outputs open corrector.� | Viewing and | |
| � | � | Max.DC 24V, 50mA.� | |
| � | � | Output holding time follows the those of � |
|
| � | � | Alarm Settings/Alarm Output. (→page 84)� | Listening Operation |
| � | Alarm output terminal | ||
| � | � | ・ | |
� | GND� | GND | GND for a signal |
|
| � |
|
|
|
|
| ALARM OUT� |
| |
|
| GND | ALARM IN� |
|
|
|
| Alarm input terminal | Recording |
|
|
|
| |
■ Connecting External Alarm Devices to the Alarm Input/ | Set |
up | |
| |
Output Terminals |
|
・ Be sure to connect cables of external alarm devices before con- |
|
necting |
|
AC adaptor cable and LAN cable to the camera. |
|
| Others |
100 | 101 |
