and Operation
Introduction
Viewing ・ Listening
Recording
Set up
Others
Viewing and listening (Cont.)
■ Audio
Audio In from the network camera can be heard through the Audio Out of the personal computer.
Set audio input to "ON" in "Camera/Audio setting" on page 79 and set the
button of the Camera Image button to 
.
■ Camera image screen |
| 3 |
|
4
1
5
2
6 | 7 |
| 8 |
Number and Item | Description |
①Camera name�� The name of the camera displaying live images.
② Operation Buttons | : Clicking the | button will zoom out. |
��: Each clicking of the 
button will zoom in on the �image. Can be zoomed in 22x at maximum..
: Each click of the | button will adjust the near focus. |
� |
|
: Clicking the 
button will set auto focusing.
| : Each click of the | button will adjust the far focus. | |||
| � |
|
|
|
|
| : Clicking the |
| button will change the display to the | ||
| button and will output sound. | ||||
| Clicking the |
| button will change the display to the | ||
| button and will not output sound. | ||||
| : Clicking the | button will change the display to the | |||
| button and will output sound from the personal � | ||||
| �computer microphone. |
|
| ||
| Clicking the |
| button will change the display to the | ||
| button and will not output sound from the personal � | ||||
| �computer microphone. | �� | |||
|
|
|
| ||
③ Operation Buttons | : Equal size button. Click | to reset to a viewer size � | |||
| according to the resolution.� | ||||
| � |
|
|
|
|
Number and Item | Description |
④Screen changeover Clicking the 
button automatically displays a multi- view screen with split frames in accordance with the
number of cameras set in Multi Screen setting (see page
90). Click the 
button to return to the
⑤Display controller Clicking the 
button displays the controller in a
separate window.�
⑥Setup Menu Display Clicking the 
button will display the Setup Menu
screen in other window.�
⑦Alarm notification This is displayed when "Motion Detection" ( page 74) or
"Alarm In" (page 74) is activated. The 
disappears if it
is clicked.�
8 Displayed images When displaying present normal images, "LIVE" will be displayed, and when displaying images from the Alarm List or Record List, "PLAYBACK" will be displayed on the screen. You can switch these views using the controller.�
9 Time and date | The current time and date of the network camera are |
| shown when "LIVE" is displayed, and the recorded time |
| and date* are shown when "PLAYBACK" is displayed |
| � |
| on the screen. When in PLAYBACK mode, S) or E) may |
| be shown with the time and date. "S)" and "E)" are |
| sometimes displayed in the PLAYBACK mode as date |
| and time data. "S)" means start of playback images |
| and "E)," end of playback images. In these modes, |
| images or date and time cannot be updated. Operate |
| playback on the controller.� |
■ Moving the screen center.
1 Click on any area in the Camera Image screen.
2 The camera moves so that the clicked point becomes the center of the image.
Introduction | |
and | Viewing |
Operation | Listening |
| ・ |
Recording | |
Set up
Others
36 | 37 |
