and Operation
Introduction
Viewing ・ Listening
Recording
Recording Images on FTP Server (Cont.)
File Transfer Order (Scheduled Recording)
Files are transferred in recorded order. However, these cameras may take following steps depending on network conditions.
1)When networking condition causes the file transferring delay, the camera may transfer the old files in the file transfer intervals.
2)Regardless of file transferring schedule, the camera continue to transferes files until all files are transfered.
NOTE
●Files sometimes cannot be transferred depending on the status of the network and FTP server. In this case, data can be stored in the SD memory card. Set "SD card back up" for "FTP recording" in "Camera setup" (see page 61) to transfer data to the FTP server as described in 2) above).
Recording Images in Personal Computer
Images (JPEG files) can be recorded in a personal computer.
Recording
1 Click 
button, one of the operation buttons in the Camera Image screen.
･"JPEG file" will appear on the personal computer.
2
Recording images in the personal computer
1 Click 
button, one of the operation buttons in the Camera Image screen.
･The setup screen for "Jpeg Local Saving" will appear.
2 Set recording seconds or the number of files. Click the Seconds button or the Files button.
Introduction | |
and | Viewing |
Operation | Listening |
| ・ |
Recording | |
Set up
Clicking will � record for set � seconds.�
�
Clicking will � record the set � number of files.
Enter recording seconds or the � number of files.�
�
Set up
Others
NOTE
●Recorded files will be saved in the folder "ToshibaNetworkCamera" in My Documents.
●The number of recorded images when the number of seconds is specified and recording interval when the number of files is specified depends on the set frame rate. (See page 72) The frame rate may be decreased depending on the network condition.
●The maximum number of seconds is 3600 seconds and the maximum number of recorded files is 1000.
Others
62 | 63 |
