Toshiba IK-WB21A Transfer Image Size, FTP Server Usage, Scheduled Recording, Record conditions

Recording Images on FTP Server (Cont.)

■ FTP Server Settings - Server 2

Introduction	When using two servers for different purposes or on different occasions,
	enter the settings for the second server.

	■ Transfer Image Size
	The size of images transferred to the FTP server can be set.
	NOTE
Viewing and	● The frame rate will be reduced if the "Transfer Image Size" differs from
	"Resolution" in the "Basic Settings" in "Camera Settings".
	■ FTP Server Usage
・	OFF: "Server 2" is not used. (Always recorded in "Server 1")
Listening Operation
	Use different FTP Server in case of communication fault:
	Choose one of the followings.
	Normally recorded in Server 1.
	Recorded in Server 2 if Server 1 fails.
	Normally recorded in Server 2.
Recording	Recorded in Server 1 if Server 2 fails.
	■ Scheduled Recording
	(Displayed if "Scheduled Recording" is chosen as an FTP
	record conditions.)
	Set if scheduled recording is desired.
Setup

Others	1) Configure "Recording Schedule"
	・Select one of the setting items for each day of a week.
	"OFF":	No recording at all.
	"All Day":	Records images all day.
	"Schedule1":	Records images in a period you configured in "Schedule 1".

"Schedule 2": Records images in a period you configured in "Schedule 2".

2) Configure Schedule

・You may configure both "Schedule 1" and "Schedule 2" and use them according to your need.

3) Setting a Recording Cycle
・Recording at a rate of one image per set time (seconds).		Introduction
・Chose a time to set.
1/30, 1/15, 1/10, 1/5, 1/3 1/2, 1, 2, 3, 5, 10, 30, 60, 120 or
180 second
・Configured recording cycle will be reflected to "All Day", "Schedule
1" and "Schedule 2".
NOTE		Viewing and
● The cycle may shift depending on image size and networkingconditions.
4) Enter "Record File Name"		Listening Operation
・Enter characters(no more than 16 characters) in the part
		・
described as (keyword).
File name will be shown like this:
	e.g. LV (Keyword) yyyy mm dd HH MM SS ***N.JPG
NOTE

●You cannot use these characters: \ / : ; , ? * < > ’ ”

	Followings	are the meaning of each part.	Recording
	LV�	Indicates this is the "Scheduled Recording" file. �
	�	�
	(Keyword)�	Enter user defined keyword.�
	�	�
	yyyymmdd�	Indicates date (Year, Month, Day). �
	�	(e.g. January 1, 2004 → 2004 01 01)�
	�	�
	�	Indicates time (Hour, Minute, Second). �
	HHMMSS�	(e.g. 23:59:00 → 23 59 00). �
	�	Time is displayed in 24-hour time display.�	Set
	�	�
	�	If the camera records more than one image at the same
	***�	period, the order is indicated with 3-digit number. The bigger	up
	�	the number, the newer (later) the image.�
	�	�
	�	Indicates Daylight Saving. �
	N	N: Not in Daylight Time �
		D: Daylight (Summer) Time�
			Others
5) Entering Server path

･ Set a server path for recording of files. Ask your FTP server administrator if you have a question.

56

Possible setting range is between 0 am and 11 pm for both "Start" and "Stop".

57