Toshiba IK-WB21A manual Viewing and listening, Viewing images, Log-in the camera

	Viewing and listening
Introduction	Viewing images
	･ Enable cookies
	Images of the network camera can be viewed through the Internet browser of
	your personal computer.
	● Preparations before displaying
	･ Set "Browser setting when proxy server is used" on page 35 when a proxy
Viewing and	server is used.
	･ Change "security" in Internet options as follows.
Listening Operation	1) Click "Internet Option" on the tool menu.
	2) Click the Security tab.
・
	3) Click the "Intranet" icon if the camera to be operated is inside the intranet,
	clicking the "Internet" icon if the camera is on the Internet.
	4) Click "Level customize."
	5) Check the following radio buttons in the displayed list:
	･ "Enable" for "ActiveX control and plug in execute"
Recording	･ "Enable" for "Execution of script of ActiveX control marked safe even
	when script is executed"
	･ "Enable" for "Download of signed ActiveX control"
	6) Click "OK."
	1 Log-in the camera.
	･ Your browser will launch and the Camera Image screen for the
	camera will pop up.
Set	･ See "Administrator Log-in and User Log-in" on pages 30 and 31 for
	the log-in method.
	･ When the security warning screen (VeriSign) appears on the first
up	use of the system, click "Yes."
	2 To close the camera image, click the	button in
	the upper-right corner of the window.
Others

34

NOTE

●The single-view screen on the Camera Image screen is the same size as that of images sent by the camera.

●The Camera Image screen can freely enlarge or reduce sizes of windows.

●Reducing the size of delivered images may omit the camera name and clock indication, but these items can be displayed by enlarging the window.

●Use the software "Independent JPEG Group's JPEG software" for JPEG enlargement. "This software is based in part on the work of the independent JPEG Group."

●Administrator authorization is needed to install "Active-X control." Install "Active-X control" after changing the personal computer setting to "Administrator authorization."

●Browser setting when proxy server is used

In case a proxy server is used, setting of the browser to bypass the proxy server during communication with the network camera is recommended.

1)Launch the browser.

2)Choose "Internet option" on the tool menu.

3)Click "Connect" tab.

4)Click "LAN Setting."

･The screen for setting a local area network (LAN) will appear.

5)Check if the checkbox "Will use a proxy server" is checked..

･If the checkbox is not ticked

The browser is not set to use a proxy server. Click "Cancel" and quit setting.

･If the checkbox is checked.

Click "Detail setting." A proxy setup screen will appear.

6)Enter the IP addresses of the network cameras in the field marked "Do not use the proxy server with addresses started with the following.

7)Click "OK."

When Windows XP SP2 is used:

Click "Install" for "Active-X control."

NOTE

●A proxy server protected by an intracompany firewall sometimes cannot be connected to the network camera. Consult the network administrator so as to avoid impacts on network camera operations.

●Communication with the network cameras via a proxy server may cause some problem. Install the network cameras after consulting the network administrator.

●Using the network cameras via a proxy server sometimes takes a long time till images are displayed after log-in or reduces the frame rate of delivered images.

Introduction
and	Viewing
Operation	Listening
	・
Recording

Set up

Others

35