Toshiba IK-WB21A manual Camera/Audio Settings, Click 6. Audio in the sub menu

and Operation

Introduction

Viewing ・ Listening

Recording

Set up

Others

Camera/E-mail Settings (Cont.)

● E-mail Address List

1)Set ON or OFF in "Always Sent to Administrator E-mail Address." ON: Always send to administrator E-mail address.

OFF: Not send to administrator E-mail address.

2)Enter "Mail-to Address." (Up to ten addresses)

3)Check send conditions.

Alarm In:	E-mail is sent to checked addresses when camera
	detect alarms.

Motion Detection: E-mail is sent to checked addresses when camera motion is detected.

NOTE

●POP is a protocol for receiving e-mail from e-mail box. As the network camera does not receive e-mail, e-mail in POP server will not be lost due to this setting.

●The e-mail function of the network camera is not compatible to "SMTP Auth."

●The frame rate deteriorates if resolution of "Attached Image Size" differs from "Resolution" in "1. General" of "Camera Settings".

●When wishing to send e-mail to administrator's address only in case of either "Alarm In" or "Motion Detectoin", set to "OFF" in "Always Send to Administrator E-mail Address", add the Administrator E-mail address to "Mail-to Address" and check one of "Send Conditoins."

Camera/Audio Settings

Set audio input to and output from the network camera.

1 Click "Camera Settings" on the Admin. Menu.

･A sub menu for Camera Settings will appear.

2 Click "6. Audio" in the sub menu.

･The screen of "Camera - Audio" will appear.

3 Configure each setting items.

･Click the Save button to save settings.

･The settings will not be reflected unless the Save button is clicked.

●Audio Input Set audio input.

ON: The camera receives audio.

OFF: The camera does not recieve audio.

･Set to "ON" when inputting audio from a microphone connected to the camera.

●Audio Input Level

An audio input level is set.

HIGH:	Increases the audio input level.
MIDDLE:	Adjusts the audio input level to a medium level.
LOW:	Reduces the audio input level.

●Audio Output Set audio output.

ON: The camera receives audio.

OFF: The camera does not recieve audio.

･Set to "ON" when outputting audio from a microphone connected to the camera.

●Audio Output Level

An audio output level is set.

HIGH:	Increases the audio output level.
MIDDLE:	Adjusts the audio output level to a medium level.
LOW:	Reduces the audio output level.

Introduction
and	Viewing
Operation	Listening
	・
Recording

Set up

Others

78 79