Toshiba SD-40KU, SD-40KD manual To Analog Audio OUT Make the following setting

Connections

Connecting to an audio system and TV equipped with component video inputs

Signal Flow

To ANALOG AUDIO OUT

• Make the following setting.

On-screen display	Select:	Page
“Digital Output”	“PCM” or	26
	“Bitstream”
	Component
“Video Output”	*P-Scan	25
	(Progressive)

* Only for TV equipped with component video input jacks which support the progressive scan.

Switching the output signal (interlaced/progressive) using the remote control You can temporarily switch the output signal for better picture quality.

Press PROGRESSIVE on the remote control during stop mode. Press PROGRESSIVE again to turn off progressive mode.

If your TV does not support the progressive scan format, the picture will appear scrambled or blank. To return to normal picture, press PROGRESSIVE button again to turn off progressive mode.

Notes

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD video player away from the tuner and radio.

•The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, high volume sound may damage your hearing as well as the speakers.

•Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power on, the speakers may be damaged.

•Progressive can be on/off only when “Video Output” is set to Component or P-Scan. (Page 25)

•In component connections, the screen might become pinkish in color when the “Video Output” is set to S-Video. This is not a defect of this unit.

•Analog audio out will not have sound if DTS playback is selected.

•When using component video cables, do not connect the S-Video cable.

•The relation between Video Output setting and content output for each output jack is as following tabulation:

User setting/operation		content output for each output jack
Video output setting	S-video output	Video output	Component output
S-Video(composite)	Composite	Composite	——
Component(interlaced)	——	Composite	Interlaced
P-Scan(progressive)	——	Composite	Progressive

ColorStream ® and ColorStream Pro ® are registered trademarks of Toshiba America Consumer Products, L.L.C.

20