Toshiba SD-40KD, SD-40KU manual Enter Password screen will appear. Input, Video-On

Customizing the Function Settings(continued)

Setting details

5) Press / to select the Parental from 1 to

8.Parental one (1) has the most restrictions while Parental eight(8) can virtually playback all DVD software.

6) Press OPEN/CLOSE button to activate the Parental Level setting.

If the DVD disc has been designed to temporarily cancel the Parental Level, the screen will change depending on which disc is played. If you select “ YES ” with the ENTER button,

“Enter Password ” screen will appear. Input the

4- digit password as you have set then followed by ENTER button and playback will start. If

“NO ” is selected, press the OPEN/CLOSE

to remove the disc.

Notes

• If you input wrong password, press CLEAR button and re-enter your 4-digit password again

• You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock function.

Set Password DVD

New Password can be set to replace the default password.

1) Press SETUP button.

2)Press / button to select the Rating.

3)Press button, then the / button to select Set Password.

4)Press ENTER button. “Enter Password” screen will appear.

5)Press the number buttons to input the current password (If the password has not been set yet after you purchase this unit, it is “8888”).

Then press ENTER.

6)Press ENTER button again, “Enter New Password” screen will appear. Press the number buttons to input the new password.

7)Press ENTER button. Now your new password has been set. Be sure to remember this number!

If you forget the password, you can erase your current password by pressing number button 8 on the remote control four times, then press ENTER button to confirm the setting.

PASSWORD: 8888

Default

Use Default Settings

If you want to return the initial language setting such as Language, Video, Audio and etc. to the factory default, select “Yes” from the following menu.

Notes

•When you reset the DVD video player to the factory default, the DVD video player will take 3-5 seconds to reset.

•The DVD video player can also be reset to the factory default by pressing the STOP button on the front panel for 5 seconds in tray OPEN mode.

DivX Registration

Some DivX ® Video-On-Demand files require

registration code, please get the code of your DVD video player as follow:

Note

This registration code is for DivX ® Video-On-

Demand only. Do not apply this code for other applications or websites.

Function setup

27