•n=1 : Private IP Mode: When the Host initiates a 1x connection, the host will be given the IP address specified in *HOSTPRIVIP. The modem will then perform 1 to 1 NAT‐like address translation, which shields the Host from network IP changes.
*HOSTPW=string
Host Password for PAP, CHAP, or PPPoE.
•string=password
*HOSTUID=string
Host User ID for PAP, CHAP, or PPPoE.
•string=user id (up to 64 bytes)
PassThru
PassThru Mode is used to communicate directly to the
PinPoint‐E internal hardware.
Caution: While the modem is in PassThru mode, ALEOS is disabled. If you need to connect to the
Note: This mode is not available through the remote AT telnet server. You will need to connect to the
Figure 1-12: AceManager : PassThru
\APASSTHRU
Sets the modem operation to pass through mode. This mode will pass any characters received on the port Ethernet directly to the internal hardware module and output any characters from the internal hardware module out the port Ethernet. This allows direct access/configuration of the hardware module. Once this mode is entered, the unit must be physically reset to return to normal operation. This command is not available in AceManager.
|
|
|
|
|
|
|
137 |
|
|
|
|
| 20070914 |
|
|
|
