Configuration Commands
*PPTSV=n
Timer for Stationary Vehicles. Time interval in minutes that the
PinPoint‐E will send in reports when it is stationary.
•n=0 : Disabled
•n=1‐255 minutes
For example, if *PPTIME=10, the PinPoint‐E will send in reports at least every 10 seconds while it is moving; however, once it stops moving, it will slow the reports down to this *PPTSV value.
Note: In order for the PPTSV (Stationary Vehicle timer) to take effect, the PPTIME value must be set to a value greater than 0 and less than the PPTSV value. The PPTSV timer checks for vehicle movement at the PPTIME interval, so if PPTIME is disabled, then PPTSV will also be disabled.
*UDPRGPS=n
Set or query GPS stamping of UDP Reliable packets. When set, data received on the host serial port will be encapsulated with the GPS date and time.
•n=0 : Disabled (default)
•n=1 : Enabled
1x/EV-DO
This group includes commands specific to 1x and EV‐DO. If you are not connecting to a modem which uses EV‐DO or 1x, you will not see this group in the menu.
Figure 1-19: AceManager : 1x/EV-DO
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 154 |
|
|
|
