Automatically Generated Names:
#I3 ‐ The ESN/IMEI will be used as the name. #CCID ‐ The CCID will be used as the name.
#NETPHONE ‐ The phone number will be used as the name.
Tip: Each modem using IP Manager needs a unique name. Two modems cannot be called “mymodem”. One could be “mymodem1” with the other as “mymodem”.
PPP/Ethernet
This group includes commands specific to PPP (serial) or Ethernet connections between the PinPoint‐E and a connected device.
Figure 1-11: AceManager : PPP/Ethernet
*DHCPSERVER=n
•Act as a DHCP server for any Ethernet device connecting to the PinPoint‐E. DHCP (Dynamic Host Configuration Protocol) allows one device, the DHCP server, to provide dynamic IP addresses to any other device which requests them.
•n=1 : Enabled. The modem will act as the primary DHCP server for the network.
•n=2 : Enabled if no other DHCP server is detected (default). If another DHCP server is detected on the network, the PinPoint‐E will not send out replies to DHCP requests.n=0 : Disabled. The Raven X will not send out replies to DHCP requests.
|
|
|
|
|
|
|
135 |
|
|
|
|
| 20070914 |
|
|
|
