*DNSUSER=d.d.d.d
Sets a user‐provided DNS to query first when performing name resolutions in the modem.
•d.d.d.d=IP address of domain server
Dynamic IP
This group includes commands specific to dynamic DNS. Dynamic DNS allows the PinPoint‐E to use a dynamic IP address account, with an IP address that can change each time you connect, and still allow you to use a fully qualified domain name to contact the PinPoint‐E using IP Manager running on a server with a dynamic DNS updater.
Figure 1-10: AceManager : Dynamic IP
*DOMAIN=name
Domain (or domain zone) of which the PinPoint‐E is a part. This value is used during name resolutions if a fully qualified name is not provided and also for DNS updates. This value can be up to 20 characters long.
•name=domain name (i.e. eairlink.com)
If *DOMAIN=eairlink.com, then when ATDT@remote1 is entered, the fully qualified name remote1.eairlink.com will be used to perform a DNS query to resolve the name to an IP address.
Tip: Only letters, numbers, hyphens, and periods can be used in a domain name.
|
|
|
|
|
|
|
133 |
|
|
|
|
| 20070914 |
|
|
|
