Configuring your PinPoint-E
•Required variable parameters are denoted with italicized text, example, Dn. The n is variable.
•Acceptable parameters and/or specific formats are listed with each command.
•Most commands with parameters can be entered with ? to read the current value (for example, AT&D? will respond with “2” if the default has not been changed).
•Optional parameters are denoted with square brackets [ ].
•AT Commands are not case sensitive. A capital “E” is the same as a lower‐case “e”.
•When you are using a terminal connection, if you enter a command which is recognized by the PinPoint‐E, it will respond with “OK”. If the command is not recognized, the response will be “ERROR”.
•Those commands applicable only to certain model numbers of the PinPoint‐E will be noted.
Caution: Symbols listed with commands, such as *, /, &, or ?, are part of the command and must be included. Commands with symbols other than * may require PassThru mode.
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 51 |
|
|
|
