D
System configurator and
PRIMERGY RX600 S3 | Status |
AB.
The system will be delivered with a
This SAS RAID Controller is equipped with 256MB Cache and BBU (suporting the RAID level 0, 1, 5, 10, 50), and can be used only for the connection of internal disks drives.
Additonally the system is equipped with a two channel Utra 320 onboard SCSI controller
This
The cables for the connection of the SAS RAID controller to the disks in the system are includes in the base unit. If an internal tape is configured, an additional SCSI cable is needed. (see section "IV Hard disk drives / Tapes" )
For the connection of external Tape devices to the on board SCSI controller, also an additional cable is needed in the system. (plus cable to connect to the subsystem SX10, see configurator SX10)
Overview SAS / SCSI-cabling of a PRIMERGY RX600 S3 SAS Base Unit
| integrated |
| 8x internal |
| SAS RAID |
| 2.5" SAS HDD |
| controller |
|
|
|
|
| internal |
| 29160 Contr. |
| Tape Devices | |
|
|
| external |
29160 Contr. |
| ||
|
|
| Tape Devices |
|
|
| internal |
| onboard |
|
| Tape Devices |
| SCSI contr. |
|
| |
|
|
| external |
|
|
| Tape Devices |
external SCSI interface
plug:
1x VHDCI / UHD68(S)
max. 1x per system
E
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server | 10 of 17 |
