Start PRIMERGY RX600 S3
System configurator and
PRIMERGY RX600 S3 | Status |
Section I
Basic unit
PRIMERGY RX600 S3 SCSI
Rack unit 4U
SCSI basic unit with:
-3 + 2 bays for 1" HDD`s (two channels)
-7 PCI Slots
-1x 64bit / 133MHz
-2x 64bit / 100MHz
-3x PCIe x4 slot (hot plug)
-1x PCIe x8 slot (hot plug)
-onboard RAID 5 functionality
with 256MB Cache (BBU optional)
-memory of basic units selectable via base memory order codes
2.60GHz/4MB 7110M | |
3.00GHz/4MB 7120M | |
3.20GHz/8MB 7130M | |
3.40GHz/16MB 7140M |
PRIMERGY RX600 S3 SAS
Rack unit 4U
SAS basic unit with:
-8 bays for 2.5" SAS HDD`s
-6 PCI Slots
-1x 64bit / 133MHz
-2x 64bit / 100MHz
-2x PCIe x4 slot (hot plug)
-1x PCIe x8 slot (hot plug)
-SAS RAID 5 Controller
with 256MB Cache and BBU
-memory of basic units selectable via base memory order codes
2.60GHz/4MB 7110M |
|
3.00GHz/4MB 7120M |
|
3.20GHz/8MB 7130M |
|
3.40GHz/16MB 7140M |
|
Basic Unit including:
-2
-2
-
-1 bay (0,5" height) for CD- or
-1x 5.25" bays FH (1,6" high) for accessible drives
-Rack- mounting kit
Systemboard with
-Intel E8501 chipset with 800MHz Frontside Bus
-1x XEON MP dua core processor (2nd, 3rd and 4th as option)
-1 memory board (2nd, 3rd and 4th as option)
-Ultra 320
-Dual
-VGA Controller
(ATI Radeon 7000M, 16MB RAM)
-Server Management Controller
-ServerView Suite Software package
incl. ServerStart, ServerBooks, Management Software and Updates
PRIMERGY PRIMECENTER- Rack
Installation ex works for one server or subsystem.
Hereby the rack will be delivered completely
With racks 12U, 24U, 38U: Systems and components
will be delivered installed in the rack With racks 46U:
Systems and components will be delivered separately
To be ordered only together with
This service is to be ordered once per installable server/storage subsystem, in order to get the server/storage subsystem mounted into the PRIMERGY racks. In case of the 46 U PRIMERGY rack, this service has to be ordered,
to get the mounting kits and the cables installed
-Interfaces: Front side
3x USB 2.0
1x VGA (15 pin)
Rear Side
2x USB 2.0
1x VGA (15 pin)
1x
2x RJ45 (on board LAN)
no PS/2 connection for KB / Mouse (USB connectivity must be used instead)
aPRIMERGY- PRIMECENTER rack e.g.:
refer configurator
Rack Mounting kit is part of the basic unit PRIMERGY RX600 S2
-1 pair of telescopic rails (713 - 812mm)
-1 bracket
-1 cable management for
This kit allows for mounting of TX/RX600 S3 in in FSC 19" DataCenter- and PRIMECENTER- racks and all server racks conforming to EIA standard
Installation in PRIMERGY 19" Classic rack is not possible.
Due to the heat dissipation of the system, sufficent cooling couldn´t be enabled in classic rack.
Connetion for KVM switch / Rack console
-RC23 can be directly connected (both USB and PS/2 connections)
-KVM S2 series needs the KVM S2 Adapter
-For ES4/8+ KVM series with PS/2 connector as well as for standard PS/2 KB / Mouse
an additional USB to PS/2 adapter must be bought additionally and connected to the RX600 S3. The adapter offers 2x PS/2 ports.
Adaper order number, to purchase via PRIMEPOWER, is:
-Appropriate FSC USB keyboard is
This keyboard also needs USB cable
A
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server | 6 of 17 |
