121
A trap manager is a management station that receives traps, the system alerts
generated by the switch. If no trap manager is defined, no traps will issue. Create a trap
manager by entering the IP address of the station and a community string. To define
management stations as trap manager and enter SNMP community strings and selects
the SNMP version.
• Server IP: Enter the IP address of trap manager.
• Community: Enter the community string.
• Trap Version: Select the SNMP trap version type – v1 or v2c.
• Click ‘Add’.
• To remove the community string, select the community string that you have defined
and click ‘Delete’. You cannot edit the name of the default community string set.
Figure C.48: Trap Configuration
SNMPv3 Context Table
Configure SNMP v3 context table. Assign the context name of context table. Click ‘Add’
to add context name.
Figure C.49: SNMPv3 Context Table