Connecting the Power Cord
Caution
• Do not use a power cord other than the one supplied with the monitor.
1.Turn off the main power switch.
2.Plug the power cord (supplied) into the AC input terminal.
3.Plug the power cord (supplied) into the AC power outlet.
Main power switch
1
3
2
AC input terminal
For power outlet
Power cord (Supplied)
Preparing the Remote Control Unit
Installing and removing the remote control batteries
How to install the batteries
1.Press the cover gently and slide it in the direction of the arrow.
Remote control operation range
The operation range of the remote control unit is approx. 5 m at an angle of approx 10° from the centre to the top/bottom/ right/left of the remote control sensor.
2.See the instructions in the compartment and put in the supplied batteries (2
3.Close the cover.
How to remove the batteries
1.Press the cover gently and slide it in the direction of the arrow.
2.Remove the batteries.
TIPS
•The supplied batteries (2
•If you will not use the remote control for a long time, remove the batteries.
•Use manganese or alkaline batteries only.
| Remote control |
5 m | sensor |
|
5 m
10°
10°
TIPS
•Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.
•Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.
•The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.
•Objects between the remote control unit and the remote control sensor may prevent proper operation.
•Replace the batteries when they run low as this may shorten the remote control’s operation range.
•If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.
•Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.
E12
