3Installation

TRANSPORTATION

INSTRUCTIONS

1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, it must only be laid on its right hand side when standing in the front of the appliance. After bringing it to upright position,it must not be operated for at least 4 hours to allow the system to settle.

3.Failure to comply with the

above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.

6.Empty any water in the drain

tray before moving. See section ‘Defrosting’ and ‘Care & cleaning’ for further information.

7.Make sure that the defrost water pipe at the back of the product is fixed to the plastic evaporating pan on the top of the compressor, to avoid defrost water spillage on the floor.

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the appliance as you might injure your fingers and hands.

Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

“IMPORTANT: Make sure that mains cable is not caught under the appliance during and after carrying

/moving the appliance, to avoid the mains cable becoming cut or damaged.”

Do not allow children to play with the appliance or tamper with the controls.

BEKO declines to accept any liability should the instructions not be followed.

INSTALLATION

INSTRUCTIONS

1.The space in the room where the appliance is installed must not be smaller than 10 cubic metres.

2.This appliance is equipped with

'Freezer Guard' which ensures that at the advised setting [4 - four on the control] the frozen food in the freezer will not defrost even if the ambient temperature falls as low as -15 °C. So you may then install your appliance in a garage or an unheated room without having to worry about frozen food in the freezer being spoilt.

However at low ambient temperatures mentioned above, fridge contents are

8

EN

Page 7 Page 9
Page 8
Image 8
Beko CXF6114 S manual Transportation Instructions, Installation Instructions
Page 7 Page 9

CXF6114 S specifications

The Beko CXF6114 S is an impressive addition to the realm of modern refrigeration, expertly designed to meet the needs of contemporary households. With innovation and practicality at the forefront, this model showcases a range of features that highlight Beko's commitment to quality and convenience.

One of the standout features of the Beko CXF6114 S is its generous capacity. With ample storage space, it enables users to organize groceries efficiently, from fresh produce to frozen goods. Its well-designed layout includes multiple shelves and compartments, allowing for easy access and keeping your essentials within reach.

Energy efficiency is another hallmark of the CXF6114 S model. Equipped with advanced technology, this refrigerator boasts a high energy rating, translating to cost savings and minimal environmental impact. It employs features like LED lighting which not only enhances visibility but also consumes less energy compared to traditional lighting solutions.

A key technological feature of the Beko CXF6114 S is its frost-free system. This eliminates the need for manual defrosting, freeing up users from the hassle of ice build-up and ensuring that your food stays fresh and well-preserved. Additionally, the model incorporates a cooling system that maintains consistent temperatures throughout the refrigerator and freezer, preventing temperature fluctuations that can compromise food freshness.

Convenience is further enhanced by the quick-freeze function, which rapidly lowers the temperature in the freezer compartment when new items are added. This ensures that freshness is locked in, safeguarding flavors and nutrients. The stainless-steel finish of the unit provides a sleek and modern aesthetic, making it a stylish addition to any kitchen décor.

User-friendly features such as adjustable shelves and door storage solutions make organizing foods more intuitive. The Beko CXF6114 S is designed to accommodate a variety of container sizes, promoting adaptability for various food items.

In summary, the Beko CXF6114 S refrigerator stands out due to its combination of spacious storage, energy efficiency, and innovative technologies. It is an ideal choice for families and individuals looking to enhance their kitchen's functionality while enjoying modern design elements. With its commitment to quality and performance, the Beko CXF6114 S continues to be a popular choice in home refrigeration solutions.
Top Page Image Contents