Perle Systems S-1000MM-XXXXXX manual Installing the Duplex Fiber Cable

Installing the Duplex Fiber Cable

1.Locate a 1000Base-X compliant duplex (2 strands) fiber cable with male connections.

2.Connect the fiber cables from one media converter to the other media converter/switch/fiber device ensuring that the RX and TX are reversed at the opposite end.

Installing the Simplex Fiber Cable

1.Locate a 1000Base-X compliant simplex (1 strand) fiber cable with male connections.

2.Connect the fiber cable from one media converter to the other media converter/switch/fiber device.

Powering up the Perle Media Converter

1.Connect the Perle supplied power adapter to the media converter.

2.Turn on the power at source.

3.Check that the PWR LED light is lit.

Perle Gigabit Fiber to Fiber Media Installation Guide 7