Mitsubishi Electronics LDT651P 31 E, Initialisation/Functional Restriction Setting FUNCTION menu

Controlling the Monitor with a PC

Initialisation/Functional Restriction Setting (FUNCTION) menu

Function	Command	Direction	Parameter		Reply		Control/Response contents
ALL RESET	RSET	W		0
ADJUSTMENT LOCK	ALCK	WR		0-2		0-2	0: OFF
OSD DISPLAY	LOSD	WR		0-1		0-1	0: ON, 1: OFF
LED	OFLD	WR		0-1		0-1	0: ON, 1: OFF

*

No

Yes

Yes

Yes

Others

Function		Command	Direction	Parameter	Reply	Control/Response contents	*
SCREEN SIZE (PC)		WIDE	WR	1-5	1-5	1: WIDE, 2: NORMAL, 3: DotbyDot, 4: ZOOM1, 5: ZOOM2	Yes
SCREEN SIZE (AV)		WIDE	WR	1-5	1-5	1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: DotbyDot	Yes
VOLUME		VOLM	WR	0-31	0-31		Yes
MUTE		MUTE	WR	0-1	0-1	0: OFF, 1: ON	No
INFORMATION	MODEL	INF1	R		Value		Yes
	SERIAL NO	SRNO	R		Value
BRIGHT		VLMP	WR	0-31	0-31	Brightness	Yes
TEMPERATURE SENSOR		DSTA	R		0	Internal temperature normal
					1	Internal temperature abnormal (Standby mode)
					2	Internal temperature abnormal (Temperature is normal now, but it was	Yes
						abnormal during operation.)
					3	Internal temperature abnormal (Brightness of the backlight decreases.)
					4	Temperature sensor abnormal
TEMPERATURE ACQUISITION		ERRT	R		Value	Temperature at temperature sensors 1 through 3 are returned in the
						following forms:	Yes
						[Sensor 1], [Sensor 2], [Sensor 3]
CAUSE OF LAST STANDBY MODE		STCA	W	0		Initialisation
			R		0	No detectable error has occurred
					1	Standby mode by POWER button
					2	Main power “OFF” by the main power switch	Yes
					3	Standby mode by RS-232C
					4	Waiting mode by No Signal (Incl: VESA DPMS/DMPM)
					6	Standby mode by abnormal temperature
					8	Standby mode by SCHEDULE setting

31 E