Mitsubishi Electronics LDT651P operation manual Declaration, IMPORTANT INFORMATION Continued

IMPORTANT INFORMATION (Continued)

•When operating the LCD monitor with an AC 100-120V power supply in North America, use a power supply cord provided with this monitor.

•When operating the LCD monitor with an AC 220-240V power supply in Europe, use a power supply cord provided with this monitor.

•In UK, use a BS-approved power cord with molded plug having a black (10A) fuse installed for use with this monitor. If a power cord is not supplied with this monitor, please contact your supplier.

•When operating the LCD monitor with a 220-240V AC power supply in Australia, use the power cord provided with this monitor.

If a power cord is not supplied with this monitor, please contact your supplier.

•For all othercase, use a power cord that matches the AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

CAUTION:

This LCD Monitor uses a lamp that contains mercury. Disposal of the lamp or the LCD Monitor with the lamp may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. (For US only).

Declaration

Declaration of the Manufacturer

We hereby certify that the color monitor LDT651P (MV813)	and marked with
is in compliance with
Council Directive 2006/95/EC:
– EN 60950-1
Council Directive 2004/108/EC:
– EN 55022	Mitsubishi Electric Corporation
– EN 61000-3-2
	2-7-3, Marunouchi,
– EN 61000-3-3
	Chiyoda-Ku
– EN 55024
	Tokyo 100-8310, Japan

Declaration of the Manufacturer

Note: This symbol mark is for EU countries only.

This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and

Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II. Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality ma-

terials and components which can be recycled and/or reused.

This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.

If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the bat- tery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)

In the European Union there are separate collection systems for used electrical and electronic products, batteries and accumulators.

Please, dispose of this equipment, batteries and accumulators correctly at your local community waste col- lection/recycling centre.

Please, help us to conserve the environment we live in!

E2