Conair Batch Feed Granulators CHS-810, CHS-814, CHS-819 and CHS-824, G H C A F D E, Options

Batch Feed Granulators CHS-810, CHS-814, CHS-819 and CHS-824

G

H

C

A

F

D

E

B

MODELS			CHS-810		CHS-814			CHS-819	CHS-824
Performance characteristics
Throughput*	lb/hr {kg/hr}		200 {90}		250 {115}		330 {150}		400 {180}
Cutter chamber opening		in. {mm}	8.7 x 9.5		8.7 x 14.2			8.7 x 18.9	8.7 x 23.6
			{220 x 240}		{220 x 360}			{220 x 480}	{220 x 600}
Rotor speed	rpm		356		356		356		356
Cutting Circle	in. {mm}		7.88 {200}		7.88 {200}		7.88 {200}		7.88 {200}
Standard motor power		Hp	5		7.5		10		10
Drive type						belt drive
Hopper type			hand, robot, conveyor - standard (sheet, roll, profile, side feed - optional)
Vacuum discharge side
						rear
Screen mesh sizes				5/32, 3/16, 1/4, 5/16, 3/8, 1/2 in. {4, 5, 6, 8, 10, 12 mm}
Rotor type				staggered rotor - open rotor optional (except for CHS-824)
Knives
Number of rotating knives			3 X 2		3 X 3			3 X 4	3 X 5
Number of bed knives			2		2		2		2
Dimensions inches {mm}
A - Height - hopper closed			57 {1450}		57 {1450}		57 {1450}		57 {1450}
B - Height - hopper open			72 {1830}		72 {1830}		72 {1830}		72 {1830}
C - Width			26.75 {680}		31.50 {800}		36.25 {920}		41 {1040}
D - Base depth			35.5 {900}		35.5 {900}		35.5 {900}		35.5 {900}
E - Overall depth			54.75 {1390}		54.75 {1390}		54.75 {1390}		54.75 {1390}
F - Infeed height			45 {1145}		45 {1145}		45 {1145}		45 {1145}
G - Feed hopper opening - width			9.44 {240}		14.13 {360}		18.86 {480}		23.63 {600}
H - Feed hopper opening - height			10.25 {200}		10.25 {200}		10.25 {200}		10.25 {200}
Weight lb {kg}
Installed			750 {340}		794 {360}		1014 {460}		1279 {580}
Shipping			882 {400}		926 {420}		1169 {530}		1477 {670}
Voltages Total amps based on standard			motor
208V/3 phase/60 Hz			20		24			31	31
230V/3 phase/60 Hz			18		22			28	28
460V/3 phase/60 Hz			9		11			14	14
575V/3 phase/60 Hz			7		9			11	11
Noise level†
With integral soundproofing					80-85 dbA

SPECIFICATION NOTES:

*Throughput is based on a 3/8 inch {9.53 mm} screen. Throughput rates are provided as a capacity guideline only. Throughput will vary according to size, shape, thickness and properties of the material to be cut, as well as the desired size of the granulate. Consult Conair for a material test or help determining the correct granulator model for your application.

†Noise level will vary according to material type being processed and the granulator configuration. These ranges are based on tests using SPI standards.

STANDARD STAGGERED ROTOR with disposable, cassette knives

Specifications may change without notice. Check with a Conair representative for the most current information.

	OPTIONS
	•	Discharge: manual, vacuum
		(standard), blower
	•	Hardened cutter housing
	•	Third bed knife
OPTIONAL OPEN ROTOR	•	3-blade open rotor
with scissor-cutting, slant knives	•	High RPM (512 RPM) motor

2 - 2 l Technical Specifications

MOTOR OPTIONS ●=standard o=optional

CHS-810 CHS-814 CHS-819 CHS-824

5 Hp	●	N/A	N/A	N/A
7.5 Hp	o	●	o	o
10 Hp	o	o	●	●
15 Hp	o	o	o	o

TPGS019/0603