Conair CHS-810 manual I n s t a l l a t i o n, Pre-Start Checks, Two Hours After First Start

I n s t a l l a t i o n

Read through the whole of Section 5 before installing the machine! All instructions must be followed in the given order to avoid injury or damage.

Be careful with the knives, they are sharp and can cause personal injury.

The granulator must only be connected to the mains by a competent electrician.

Pre-Start Checks

•The unpainted parts of the machine are protected with oil prior to delivery and transport Clean the granulator from rust protection agent before it is used.

•Check the knife clearance and tightening torque on the bolts for the knives. Refer to installation of knives in Section 7.

Two Hours After First Start

Check the knife clearance again and the tightening torque of the knife retentio screws. Check the screws for both the fixed and rotating knives.

5 - 2 l I n s t a l l a t i o n