Conair CHS-810 This manual applies to the CHS series of Conair granulators

This manual applies to the CHS series of Conair granulators.

Model nos. CHS-810, CHS-814, CHS-819, and CHS-824 specify the size of the cutting chamber.

Supplementary designations specify:

Read the Manual before installing and using the machine. Be careful when the knives are accessible, they are sharp, and can cause personal injury!

•These Conair granulators are designed for granulating injection molded, blow molded and extruded plastic parts and scrap.

•The size and performance of the granulators are designed to suit the type of waste material.

•Approval must be obtained from Conair for granulating other products and materials for the warranty conditions to apply.

•The granulators are designed so that maintenance and cleaning can be done quickly and easily, both routine maintenance and changing of materials.

•All service must be done by trained service personnel.

•This Manual contains instruction for both handling and service.

•Chapter 7 contains instructions directed towards service personnel.

•Chapter 11 contains accessory equipment for the machine.

•Other Sections contain instructions for the operator.

•The granulators are delivered with an Instruction Manual and touch-up paint.

•Any modifications or conversions of the machines must be approved by Conair. This is to prevent injuries. The machine warranty and product assurance would otherwise be rendered void.

•Please address any queries to the local Conair representative or Conair customer service.

1 - 4 l I n t r o d u c t i o n