Conair CHS-810 manual Cleaning, Switch “Off” both the main switch and the switch on the granulator

Cleaning

Clean at color change, monthly or at least once/300 hours.

Be careful when the hopper have been opened. The knives are now accessible, they are sharp, and can cause personal injury.

1Check that the hopper is empty, then stop the granulator.

Switch “Off” both the main switch and the switch on the granulator.

2Clean the outside of the hopper.

3Undo the star knobs on the hopper.

4Undo the tip chatch.

✐NOTE! The hopper is counterbalanced with one alter- native two gas springs, but hold the hopper at the same

time, so that it does not fall down out of control.

5Open/fold the hopper backwards.

6Clean the hopper´s opening.

7Lift out and clean the inner and outer flaps.

8Open the door.

9Undo and pull out the extraction pipe from the rear of the granulator. Alt. machine with extraction fan, undo the quick coupling on the outlet pipe stub.

10Remove the granule bin.

11Undo the star knobs for the screen box.

✐NOTE! Hold the screen box at the same time, so that it does not fall down out of control.

12Fold the screen box down.

13 Undo and clean the screen.

A

14 Undo and remove the blue screws (A) for the bearing cleaning holes.

15 Blow through the holes with compressed air and rotate the cutter at least one turn.

✐NOTE: When the cutter is rotated manually, do this with great care.

The knives are sharp and can cause personal injury.

6 - 4 l Operation and Daily Maintenance