EKI-7758F User Manual 114
Here you can set up every port’s bandwidth rate and frame limitation type.
• Ingress Limit Frame type: select the frame type that wants to filter. The frame
types have 4 options for selecting: All, Broadcast/Multicast/Flooded Unicast,
Broadcast/Multicast and Broadcast only. Broadcast/Multicast/Flooded Unicast,
Broadcast/Multicast and Bbroadcast only types are only for ingress frames. The
egress rate only supports All type.
• All the ports support port ingress and egress rate control. For example, assume port
1 is 10Mbps, users can set it’s effective egress rate is 1Mbps, ingress rate is
500Kbps. The switch performs the ingress rate by packet counter to meet the
specified rate.
• Ingress: Enter the port effective ingress rate (The default value is “8192”)
• Egress: Enter the port effective egress rate (The default value is “0”)
• And then, click ‘Apply’ to apply the settings.
Figure C.38: Rate Limiting