111
• Security: when its state is “On” that means this port accepts only one MAC address.
• Click ‘Apply’ button to apply the configuration.
Figure C.33: Port Control
C.2.3 Port Status
In Port Status, you can view every port status that depends on user setting and the
negotiation result.
Figure C.34: Port Status
• Port No.: select the port that you want to configure.
• State: current port status. The port can be set to disable or enable mode. If the port
setting is disable then will not receive or transmit any packet.
• Speed/Duplex: set the port link speed.
• Duplex: set full-duplex or half-duplex mode of the port.
• Flow Control: set flow control function is Symmetric or Asymmetric in Full Duplex
mode. The default value is Symmetric.
• Security: when its state is “On” that means this port accepts only one MAC address.