51 Chapter3
Figure 3.20: SNTP Configuration
IP Security
IP security function allows user to assign 10 specific IP addresses that have permission to access the
switch through the web browser for the securing switch management.
• IP Security Mode: when this option is in Enable mode, the Enable HTTP Server and Enable Telnet
Server check boxes will then be available.
• Enable HTTP Server: when this check box is checked, the IP addresses among Security IP1 ~ IP10
will be allowed to access via HTTP service.
• Enable Telnet Server: when checked, the IP addresses among Security IP1 ~ IP10 will be allowed to
access via telnet service.
• Security IP 1 ~ 10: Assign up to 10 specific IP address. Only these 10 IP address can access and
manage the switch through the Web browser
• And then, click Apply button to apply the configuration.
Note Remember to execute the “Save Configuration” action, otherwise the new
configuration will lose when switch power off.