EKI-7758F User Manual 58
Figure 3.28: Port Mirroring
Rate Limiting
You can set up every port’s bandwidth rate and frame limitation type.
• Ingress Limit Frame type: select the frame type that wants to filter. The frame types have 4 options
for selecting: All, Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Broadcast only.
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Bbroadcast only types are only for
ingress frames. The egress rate only supports All type.
• All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps,
users can set it’s effective egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the
ingress rate by packet counter to meet the specified rate
• Ingress: Enter the port effective ingress rate (The default value is “0”)
• Egress: Enter the port effective egress rate (The default value is “0”)
• And then, click Apply to apply the settings