Configuration Commands
*IPPINGADDR=[d.d.d.d][name]
Set the IP address or valid internet domain name for the PinPoint‐E to ping to keep itself alive (online). *IPPING must to be set to a value other than 0 to enable pinging.
•d.d.d.d=IP address
•name=domain name
*MSCIUPDADDR=name[/port]
Modem Status Update Address ‐ where Name/Port is the domain name and port of the machine where the modem status updates will be sent. The status parameters of the PinPoint‐E are sent in an XML format.
•name=domain name
•port=port
*MSCIUPDPERIOD=n
Modem Status Update Period ‐ where n defines the update period in seconds.
•n=0 : Disabled.
•n=1‐255 seconds
*NETWDOG=n
Network connection watchdog: The number of minutes to wait for a network connection. If no connection is established within the set number of minutes, the PinPoint‐E modem resets.
•n=0 : Disabled.
•n=minutes : Default = 120 min.
*RESETCFG
Wipe the non‐volatile data in the modem. Cannot be used with
AceManager.
Caution: You may need to reactivate your modem if you erase the
*SNMPCOMMUNITY=string
The SNMP Community String acts like a password to limit access to the modem’s SNMP data.
•string =string of no more than 20 characters (default = public).
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 142 |
|
|
|
