Windows Dial-up Networking (DUN)

Caution: If you have an existing LAN connection, installing DUN for the modem may interfere with the LAN connection. It's recommended to disconnect your LAN connection before using a PPP connection with your PinPoint-E.

Once the DUN connection is initiated, by default, it will take over as the “default route” for network communication and specifically for Internet access. If you want the two connections to co‐exist, you will need to de‐select “Use default gateway on remote network” (described later) and use the route command in Windows to setup routing through the modem properly. This guide does not provide information on the route command. You may need to consult with your network admin‐ istrator to properly configure routing.

1.Create a new network connection.

a.Select Start > Connect To > Show All Connections to open the Network Connections window.

Figure 2-10: Windows : Start menu

 

 

 

 

 

 

 

Rev 3.0B Feb.08

 

 

 

 

 

164

 

 

 

Page 169
Image 169
Sierra Wireless EV-DO manual Create a new network connection, Windows Start menu