Z
Reset the PinPoint‐E. In AceManager, this command is performed with the Reset option on the toolbar.
Tip: *DATZ=1 will disable Z.
&W
Writes all changed modem settings. If this command is not issued, any modified values will revert back to their previous values at modem reset. Cannot be configured in AceManager.
*DATE=[mm/dd/yyyy],[hh:mm:ss]
Sets and queries the internal clock. Either the date and time can be specified, or simply one of the two can be specified in which case the unspecified value will remain unchanged. The date and time are always specified 24‐hour notation.
•mm/dd/yyyy=date in month/day/year notation
•hh:mm:ss=time in 24‐hour notation
Note: In PinPoint line modems, the GPS will be used to set the time, in which case any date/time specified by this command will be ignored.
*DPORT=n
The modemʹs Device Port which the modem is listening on for inbound packets/data/polls. Can also be set with the command S110.
•n=1‐65535
*HOSTPAP=n
Use PAP to request the user login and password during PPP negotiation on the host connection.
•n=0 : Disable PAP request (Default).
•n=1 : Takes user login and password from Windows DUN connection and copies to *NETUID and *NETPW.
*NETALLOWZEROIP=n
Allows the displayed IP address in *NETIP to end in zero (ex. 192.168.1.0).
•n=0 : Do not allow.
•n=1 : Allow.
|
|
|
|
|
|
|
121 |
|
|
|
|
| 20070914 |
|
|
|
